LS Swap systems that work with Ridetech Tru Turn system for 1rst gen Fbody

[Rod P]

I used real simple parts on my own car, here's the parts and numbers


TALL 1969 350 factory engine mounts
#7-519 Prothane engine plate and mount kit
#20140 Moroso Pan and the correct pick up
#LS10 Sanderson Headers
#20-143 Holley Accessory Drive Kit
factory 4 speed trans cross member(modified the trans mount slots 1inch longer)
#TM32AN-T Tanks inc fuel tank, with internal pump

[rallystyle]

the holley system does work with the mid length headers. for there long tube you have to mod 1 tube on the pass side and there is a pdf you can download thats linked on the ls1tech thread.
http://ls1tech.com/forums/conversion...truturn-6.html
post 119

speed tech says there system works with no mods having to be made.
http://www.speedtechperformance.com/...rod/prd383.htm