...

Go Back   Lateral-g Forums > Lateral-G Open Discussions > Project Updates
Reload this Page '67 Chevy II Project
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 02-15-2015, 09:12 PM
wiedemab's Avatar
wiedemab wiedemab is offline
Senior Member
  
Join Date: Oct 2005
Location: Batesville, IN
Posts: 1,475
Thanks: 0
Thanked 7 Times in 3 Posts
Default
Driver's side quarter fitted and mostly welded.



Porta-Power to push the wheelhouse out to make the quarter fit properly. As I've mentioned earlier in the thread the passenger's side outer wheelwell didn't fit very well.



Not always using fancy tools!!!! Block of wood along with the Porta-power.



Notes - - because I'm forgetful!



There is a little wave in the quarter and using a long straight edge the lower rear of the quarter needs to go in slightly. We'll jack out with a little pressure where I have "Hold" and using body clamps to pull in on the lower until it's where it needs to be. Finishing some of the welds all while holding it.

__________________
__________________
Brandon Wiedeman
'72 Suburban
'67 Chevy II -
https://lateral-g.net/forums/showthread.php4?t=46846

I have about 3 lifetimes worth of projects planned out in my head!
Reply With Quote
  #2  
Old 02-15-2015, 09:18 PM
wiedemab's Avatar
wiedemab wiedemab is offline
Senior Member
  
Join Date: Oct 2005
Location: Batesville, IN
Posts: 1,475
Thanks: 0
Thanked 7 Times in 3 Posts
Default
I also picked up the firewall bracket and master cylinder for my hydraulic clutch setup. I talked quite a bit to Walt from Classic Nova about it. I believe he did some of, if not most of the development and fitup on the part and DSE appears to be making it. Nice piece that reinforces the firewall and locates things properly.

__________________
__________________
Brandon Wiedeman
'72 Suburban
'67 Chevy II -
https://lateral-g.net/forums/showthread.php4?t=46846

I have about 3 lifetimes worth of projects planned out in my head!
Reply With Quote
  #3  
Old 02-15-2015, 09:32 PM
camcojb's Avatar
camcojb camcojb is online now
Administrator
  
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,287
Thanks: 6,937
Thanked 2,127 Times in 976 Posts
Default
Nice work Brandon!
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness
Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes
Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #4  
Old 02-15-2015, 10:50 PM
GregWeld's Avatar
GregWeld GregWeld is offline
Lateral-g Supporting Member
  
Join Date: Jul 2005
Location: Scottsdale, AriDzona
Posts: 20,741
Thanks: 504
Thanked 1,080 Times in 388 Posts
Default
Way kool!!


I love these Novas!
Reply With Quote
  #5  
Old 02-16-2015, 04:54 AM
Jay Hilliard's Avatar
Jay Hilliard Jay Hilliard is offline
Senior Member
  
Join Date: Nov 2004
Location: NC
Posts: 1,119
Thanks: 34
Thanked 16 Times in 12 Posts
Default
Very nice work. I love your frame table.
__________________
Jay
Reply With Quote
  #6  
Old 02-16-2015, 08:55 AM
Justin@EntropyRad Justin@EntropyRad is offline
Senior Member
  
Join Date: Jan 2015
Location: Charlotte, NC
Posts: 282
Thanks: 0
Thanked 0 Times in 0 Posts
Default Following
Anything with Chevy II in the title has my attention!

Lots of cutting on that one...cant wait to see it finished
Reply With Quote
  #7  
Old 02-16-2015, 10:01 AM
wiedemab's Avatar
wiedemab wiedemab is offline
Senior Member
  
Join Date: Oct 2005
Location: Batesville, IN
Posts: 1,475
Thanks: 0
Thanked 7 Times in 3 Posts
Default
Quote:
Originally Posted by Justin@EntropyRad View Post

Lots of cutting on that one...
Yep - -lots of RUST!!!!!
__________________
__________________
Brandon Wiedeman
'72 Suburban
'67 Chevy II -
https://lateral-g.net/forums/showthread.php4?t=46846

I have about 3 lifetimes worth of projects planned out in my head!
Reply With Quote
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -7. The time now is 08:26 AM.
Contact Us - Lateral-g.net - Archive - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net