...

Go Back   Lateral-g Forums > Technical Discussions > Transmission and Rear End
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 02-18-2015, 07:36 AM
workng247 workng247 is offline
Member
 
Join Date: Mar 2013
Posts: 25
Thanks: 0
Thanked 0 Times in 0 Posts
Default Best T56 Magnum/ rear gear combo

Looking to get some input on what you guys would consider the best trans/ rear gear combo for my upcoming 69 Camaro LS swap. I'll be using the LS3 480hp crate engine and a T56 magnum. Looking for best all around street performance. I have original 12 bolt with 3.42 and Truetrac now. Will change gear if necessary. So, which version of the T56 would you recommend and why?

Thanks
Reply With Quote
  #2  
Old 02-18-2015, 09:22 AM
Sieg's Avatar
Sieg Sieg is offline
Moderator
 
Join Date: Dec 2010
Location: Pacific Northwet
Posts: 8,034
Thanks: 33
Thanked 99 Times in 41 Posts
Default

Is your T56 wide or close ratio?

I had 3:31's and went to 3:73 with a 26.6" tire with a close ratio T56 Mag and it's just about right for my needs.

This will help you figure it out: http://www.tremec.com/calculadora.php
Reply With Quote
  #3  
Old 02-18-2015, 09:32 AM
workng247 workng247 is offline
Member
 
Join Date: Mar 2013
Posts: 25
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Sieg View Post
Is your T56 wide or close ratio?
Thats what I am trying to figure out, at this point I can go either way.

I've done the RPM calculators but its hard to get any "feel" from the numbers.
Reply With Quote
  #4  
Old 02-18-2015, 05:51 PM
Schwartz Perf Schwartz Perf is offline
Supporting Vendor
 
Join Date: Apr 2012
Location: Chicagoland
Posts: 399
Thanks: 0
Thanked 42 Times in 18 Posts
Default

With your combo i'd definitely do the close-ratio. If you had a taller gear like 4.10 then the wide would be a little better.

If you don't have a source yet for the T56 or other parts, feel free to PM me for a quote on that stuff!

-Dale
__________________
SchwartzPerformance
Where classic style meets modern technology.
SchwartzPerformance.com
GMachineChassis.com
LSxEngines.com
Facebook | Instagram | YouTube
Reply With Quote
  #5  
Old 02-18-2015, 11:10 PM
Sieg's Avatar
Sieg Sieg is offline
Moderator
 
Join Date: Dec 2010
Location: Pacific Northwet
Posts: 8,034
Thanks: 33
Thanked 99 Times in 41 Posts
Default

I had a '94 1LE Camaro with a wide ratio T56 for a couple years as a daily driver, for my personal tastes the close ratio gearing is light years better. I don't like a low first gear and a lazy 6th. The close ratio is seamless through the gears no short-shifting to second and over revving 5th to make 6th. I'm running a carb'd Gen 1 SBC with cam that idles at 1K and is rated to make power between 2500-6500....first gear in the close ratio is great.

Without a doubt the T56 is the best mod done on my car over the 25 years I've had it. After three plus years with the trans I still love it everytime I drive it.....it makes me want to just go out and drive.

FWIW - I waited 2 years before changing rear end ratios and spent a lot of time analyzing my typical driving conditions and rpm's, factoring ideals and compromises before I went with 3:73, no regrets.
Reply With Quote
The Following User Says Thank You to Sieg For This Useful Post:
jorgezee1 (04-23-2021)
  #6  
Old 02-19-2015, 12:14 AM
Vince@Meanstreets's Avatar
Vince@Meanstreets Vince@Meanstreets is offline
Senior Member
 
Join Date: Nov 2004
Location: Bay Area, California
Posts: 5,532
Thanks: 13
Thanked 18 Times in 12 Posts
Default

Quote:
Originally Posted by Sieg View Post
I had a '94 1LE Camaro
keyword is "had" and my key phrase was " why don't you still ?"

Quote:
Originally Posted by Sieg View Post
FWIW - I waited 2 years before changing rear end ratios and spent a lot of time analyzing my typical driving conditions and rpm's, factoring ideals and compromises before I went with 3:73, no regrets.
Truth
__________________
MEANSTREETS PERFORMANCE

Dealer for
ACCUAIR rideheight control systems
ENTROPY RADIATORS XXX radiators for your pro-touring vehicle
FORGELINE MOTORSPORTS Highline custom 3 piece wheels
WEGNER AUTOMOTIVE Custom engines and LSX drive systems
SPEEDTECH PERFORMANCE Bay Area stocking dealer

NEVER FORGET -11
Reply With Quote
  #7  
Old 02-19-2015, 12:44 AM
Sieg's Avatar
Sieg Sieg is offline
Moderator
 
Join Date: Dec 2010
Location: Pacific Northwet
Posts: 8,034
Thanks: 33
Thanked 99 Times in 41 Posts
Default

I should add that I went with an old school mechanic that specializes in differentials and used a Motive gear set. They are silent.....which was something I was worried about as I'd heard many a story of gear whine associated with the 3:73 ratio.
Reply With Quote
  #8  
Old 02-27-2015, 09:36 AM
workng247 workng247 is offline
Member
 
Join Date: Mar 2013
Posts: 25
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Sieg View Post
I had a '94 1LE Camaro with a wide ratio T56 for a couple years as a daily driver, for my personal tastes the close ratio gearing is light years better. I don't like a low first gear and a lazy 6th. The close ratio is seamless through the gears no short-shifting to second and over revving 5th to make 6th. I'm running a carb'd Gen 1 SBC with cam that idles at 1K and is rated to make power between 2500-6500....first gear in the close ratio is great.

Without a doubt the T56 is the best mod done on my car over the 25 years I've had it. After three plus years with the trans I still love it everytime I drive it.....it makes me want to just go out and drive.

FWIW - I waited 2 years before changing rear end ratios and spent a lot of time analyzing my typical driving conditions and rpm's, factoring ideals and compromises before I went with 3:73, no regrets.
OK, thats some good input and confirms what I was thinking.

Now, what about using the factory center console? I was looking at your build and the problems you had with the offset shifter leaking. What did you finally end up with and what would you recommend? Keep it? Move it? Lose it? I'd like to keep it but it seems like the shifter location with it is not ideal. Thoughts? Thanks
Reply With Quote
  #9  
Old 03-03-2015, 09:08 AM
workng247 workng247 is offline
Member
 
Join Date: Mar 2013
Posts: 25
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Bump
Reply With Quote
  #10  
Old 03-03-2015, 10:30 AM
Blake Foster's Avatar
Blake Foster Blake Foster is offline
Senior Member
 
Join Date: Oct 2005
Location: St George Utah
Posts: 2,526
Thanks: 6
Thanked 101 Times in 44 Posts
Default

Quote:
Originally Posted by Sieg View Post
I should add that I went with an old school mechanic that specializes in differentials and used a Motive gear set. They are silent.....which was something I was worried about as I'd heard many a story of gear whine associated with the 3:73 ratio.
Yes.................. Sometimes, we have switched to US Gear because of the inconsistency of the motive 3.73 sets.
we NORMALLY recommend 3.73 (seems to work for everything ) but I really liked my 3.89 gears
__________________
Blake Foster
www.speedtechperformance.com
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:10 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net