Speedtech Performance NEW First / Second gen SubFrame

[Ron Sutton]

Originally Posted by holschen

pics ... Plbbeeaaase ;-)
Price wise?
Happy news came now as I was thinking of a subframe.
But this will not be upgradeble as the old one right?

New Speedtech Front Subframe & Suspension Package

New Cutting Edge Design Includes:

• Strong Box type laser cut and jig welded construction - reduced weight over factory subframe.
• Special subframe width & shape allowing 315 front tires.
• Factory alignment holes offer ease of aligning frame to body and bumpers.
• Mounting hardware, instructions, and custom alignment specs.
• Ron Sutton Race Technology geometry built-in.
• Upper control arms feature additional caster adjustability.
• Speedtech high clearance upper & lower tubular control arms
• Control arms powder coated gloss black and fully assembled with Delrin bushings.
• 3-piece Speedway Engineering sway bar – Wide choice of rates.
• Unisteer power rack & pinion steering.
• Next-Gen ATS 7075 Forged Aluminum Spindles.
• ATS high-Ackerman steering arms for ATS spindles.
• C7 heavy duty bearings & hubs.
• Increased header and exhaust clearance.
• Motor stands accept small block engines with OEM style mounts.
• Accepts LSX engines with Speedtech fabricated oil pan and motor mounts.
• Adjustable engine frame stands allows 3/4" fore & aft range.
• Fully adjustable rear cross member fits all GM transmissions as well as T-56 and TKO.
• Built-in tow/tie down hooks eliminate strapping around painted frames.
• Comes bare. Powder coat options available.

From Speedtech Performance, the base package includes:

• Viking double adjustable twin tube coil-over shocks, including delrin thrust washers & adjusting wrench.
• Viking coil-over springs – Wide choice of rates.
• Base Price for complete subframe & suspension is $6899 + $200 crating fee

From Ron Sutton Race Technology, the base package includes:

• Ridetech single adjustable mono-tube gas coil-over shocks, including delrin thrust washers & adjusting wrench.
• Hypercoil coil-over springs – Wide choice of rates.
• Base Price is $7099 + $200 crating fee

OPTIONS:
• Powder Coat Subframe – Flat Black
• Powder Coat Subframe – Semi-Gloss Black
• Powder Coat Subframe – Gloss Black
• Powder Coat Subframe – Gun Metal Grey
• Powder Coat Subframe – Silver
• Billet Aluminum Body Mount Set
• Engine Bay Round Tube Chassis Down Bar Supports
• Double Joint Steering Shaft Kit
• GM Steering Column Adapter .
• LSx Engine Adapter Plates
• Speedtech 1 3/4" LSx Headers, Mill Finish
• Speedtech LSx 1 3/4" Headers, Show Polished Finish
• Speedtech 2" LSx Headers, Mill finish
• Ron Sutton Tailored Suspension Tech Service #40STP
• Ron Sutton Tailored Brake Tech Service #29
• Ridetech Digressive Triple Adj Shocks w/AutoX-Star Valving
• Ridetech Digressive Triple Adj Shocks w/AutoX-Star Valving
• Ridetech Digressive Triple Adj Shocks w/AutoX-Star Valving
• JRI Digressive Triple Adj Shocks w/AutoX-Star Valving
• JRI Digressive Triple Adj Shocks w/Track-Star Valving


If you like to spec one out for your car project, contact either:

Speedtech Performance at:
Phone: (435) 628-4300
Shop: 3884 S. River Road, Bldg. A, St. George, Utah 84790
Email:[email protected]
Website: SpeedtechPerformance.com

Ron Sutton Race Technology at:
Phone: (916) 834-8051
Email: [email protected]
Website: RonSuttonRaceTechnology.com