Need advice... buy new 9" or rebuild 12 bolt

[Vega$69]

Originally Posted by Sheck44

Vince .. issue is 6 week wait from Roger, and with the sucky Can $$ this will end up costing $5000 ++

Looking into what actually broke .. will let you know

Cheers
Steve

Need to figure out what broke. Dynos are relatively easy on the rear end compared to banging gears on the street. Something may not have been right.

If the case is good you can sell it pretty easy and put the $ towards an F9.

You can go with Currie, Strange one of the others and install the Speedtech brackets and bolt it in.

Btw. I run F9s in all my cars

[Vince@Meanstreets]

Originally Posted by Vega$69

Need to figure out what broke. Dynos are relatively easy on the rear end compared to banging gears on the street. Something may not have been right.

If the case is good you can sell it pretty easy and put the $ towards an F9.

You can go with Currie, Strange one of the others and install the Speedtech brackets and bolt it in.

Btw. I run F9s in all my cars

very true, its not like you are driving another mile to find a good place to pull over.

I bet its the pinion shaft or gear. which would be an easy fix.