LS1 Swap fuel pressure dropping????

[Ron in SoCal]

Originally Posted by n77nxc

The setup is fine but does have a few limitations that are not advertised by the manufacturer.

The internal baffling is designed solely to control fuel slosh/starvation with the fuel level over a 1/3 full. Anything below you run the risk of stalling the engine during hard cornering and acceleration. My car has stalled/hesitated during both conditions with roughly a 1/4 tank left.

I'm hoping the Vaporworx/Rick's tank setup takes care of the issues I experienced.

So far in my experience, it does. Below a 1/4 tank and no issues on the track. I'm pretty sure Carl ran it down to a teacup of fuel with no starvation as well.

[CarlC]

Originally Posted by Ron in SoCal

So far in my experience, it does. Below a 1/4 tank and no issues on the track. I'm pretty sure Carl ran it down to a teacup of fuel with no starvation as well.

1/4 tank? Shoot, that's not even a challenge ;-)