1968 Torino GT

[Leroy Rochester]

I had a '68 GT back in '93 or so and I've always been fond of the Torinos, so I'm checking in regularly too!

[jarhead]

thanks for the encouragement guy's!

[jarhead]

Just got the first picture from Woody @ FordStrokers.com

427 SHP Dart block
forged crank, rods, pistons
12.5:1 compression
hydraulic roller cam
Twisted Wedge 205 11R Comp heads
Victor Jr.
e85 fuel
H.P. innovations 950 CFM Holley
MSD 85805 billet distributor
MSD 6530 digital/programable

GROSS VALVE LIFT .576 .576
DURATION @ .006
TAPPET LIFT 275 286
VALVE TIMING OPEN CLOSE
@ .050 INT 6 38
EXH 51 3
106.0 CENTERLINE
DURATION @ .050 int- 225.00 exh- 234.00
LOBE SEPARATION 110.0
ROCKER ARM RATIO 1.60

I asked Woody for a minimum of 500~HP/500~TRQ, Comp Cams calculator shows allot more but won't know until dyno.

It's probably going to set for a few months once I get it, I am remodeling two bathrooms first

[waynieZ]

Nice Joe, Sweet Motor!

[jarhead]

Thanks Wayne, it ships tomorrow, hoping for another picture today!

[jarhead]

[Flash68]

Killer parts list!

Those are pretty small heads for those cubes.