PSI Conversion

[Swain]

Hooked up a NOID light this AM. The light comes on then never comes back. Seems like the injectors only get a signal for a second then goes away. I have sent the ECU back twice. I have a guy coming over Sunday to hook it all up.



We have added grounds everywhere. Cleaned off metal so its a good contact.

[Vega$69]

Ckeck the ignition relay on the psi fuse box.

Switch it with the fuel pump relay and see if the noid light works.

Pull the relay and check that you have 12v to it key on and when cranking.

[Swain]

Originally Posted by Vega$69

Ckeck the ignition relay on the psi fuse box.

Switch it with the fuel pump relay and see if the noid light works.

Pull the relay and check that you have 12v to it key on and when cranking.

Thanks for all the help. I just sent my Dad a text for him to try it. I will keep you posted.

[Swain]

She runsssssssssssssssss

Instagram. Jayswiz

[cpd004]

Originally Posted by Swain

She runsssssssssssssssss

Instagram. Jayswiz

Congrats Jay.

[XLexusTech]

What was it?

[Vega$69]

Come on man. What was it?

Inquiring minds want to know.

[Swain]

Originally Posted by Vega$69

Come on man. What was it?

Inquiring minds want to know.

Still gotta figure it out. I tried a little starter fluid and it fired right up. It won't start unless you spray just a tad. So maybe it needs a little start up tune

[Swain]

714-345-3875 text if ya wanna here a short clip

[dhutton]

Sounds like you do not have proper ECM voltage while cranking. Have you measured the voltage with a meter while cranking etc?

Don