WTSC Grand National

[shadow images]

Originally Posted by MeanMike

For now, no a/c. I would have had to pull my dash out to fab up some a/c duct connectors to make it blow from the factory vents. The way my cage is built the windshield has to come out of the cage must be cut to get the dash out. So I just decided to get it going without it. The accessory bracket is ready for the compressor whenever I do get that urge to put it in, but so far I haven't needed it in the fall weather.

It can be done without removing the dash but its way easier if you do. I engineered the kit for ArizonaGN.com. I don't blame you for wanting to drive it for awhile.

[instro84]

Mike, do you have a part number for the fitting you have on your fuel pressure regulator?
thanx

[MeanMike]

Originally Posted by instro84

Mike, do you have a part number for the fitting you have on your fuel pressure regulator?
thanx

It hurts a little to buy one, but it's clean.
http://www.summitracing.com/parts/aei-15638

[instro84]

thanx Mike.

[MeanMike]

You'll need a thin wrench on the -8 fuel rail side to get it tight. I assume you are using Champion fuel rails also.