Fuel Hose/fittings suggestions - Lateral-g Forums

**will69camaro** · #1 12-23-2015, 04:38 PM

Agree on that fully. Friend swapped to same hose I have and said fuel smell is 100% gone in his garage.

Ptfe lines are a bit of a pain to work with but not overly complex. Had zero experience before starting and got the hang of it quickly.

William

rons69camaro · #2 12-23-2015, 06:29 PM

Thanks guys! Where'd you locate the filter and Y block Will?

**will69camaro** · #3 12-23-2015, 06:31 PM

Y block is in the DSE shock channel in back and filter is basically right under rear passenger feet. Just behind the rear drain plug.

**will69camaro** · #4 12-23-2015, 06:36 PM

Pics

randy · #5 12-23-2015, 07:59 PM

we use 1/2 fuel stainless steel fuel line and flex lines from the hardline to the tank and engine. Both ends have a T off of them

**GregWeld** · #6 12-23-2015, 10:09 PM

Quote:

Originally Posted by randy

we use 1/2 fuel stainless steel fuel line and flex lines from the hardline to the tank and engine. Both ends have a T off of them

Agree --- use SS tubing for the majority of the system and only use flex where you must. Just my opinion - but it's the way I do things.

Che70velle · #7 12-24-2015, 08:22 AM

Quote:

Originally Posted by GregWeld

Agree --- use SS tubing for the majority of the system and only use flex where you must. Just my opinion - but it's the way I do things.

Greg, how do you go from SS hard line to flex line, meaning what fitting do you use in this application, on the hard line?