DSE vs. SpeedTech Performance. . .

[atomicjoe23]

Originally Posted by Blake Foster

This is the newest addition to the ExtReme Product line,
Right now it is for 67-69 Camaros. It will be cut into the floor under the seat pan (you will need to remove the seat pan) fit mid way into the tunnel and full width rocker to rocker. Then the subframe connectors fit 1/2 way into the floor pan and into the rear spring perch location. The torque arm mount will be removable and that part will form a drive shaft loop as well. we will have a version that does not have a torque arm mount if you are just wanting to retrofit an existing rear suspension. it will not impede the exhaust any more than the trans X member.
Still working out final pricing and install instructions.

[IMG][/IMG]

http://i1235.photobucket.com/albums/...psilrbqp0i.jpg

I like that. . .I had been leaning towards designing and building an offset, de-coupled 3-link rear suspension using a Watt's linkage, but I may change my mind and go with a torque arm now. . .

[Blake Foster]

Originally Posted by atomicjoe23

I like that. . .I had been leaning towards designing and building an offset, de-coupled 3-link rear suspension using a Watt's linkage, but I may change my mind and go with a torque arm now. . .

SEE NOW your THINKING!!!