Wilwood 12.88" front brake kit.

[MillerBuilt]

Hello,

To minimize your loss that often comes with trying to sell new product at highly discounted rates, and just as an idea, but if you buy the below items (Summit Racing - except maybe the spacers), along with the 14"x1.1" rotors of your choice, you will have what you want. Then sell your rotors to someone else as replacements for their 12.88" kit.

Caliper Bracket Longer Studs:
QTY (4) Part#230-9079 Stud, 3/8-16 x 3/8-24 x 3.15 Long

Caliper Bracket/Caliper Spacers:
QTY (4) Part#300-2089 Spacer, .50” Long
****you can substitute a stack of washers with the correct i.d./o.d. to accomplish same thing as the above "spacers".

Hope this helps.

Jay

[Tinker]

Thanks Jay, that was my original thought, but the calipers in this kit are the billet versions which have a 13" max rotor diameter. I was going to state that in the original post so these would make a nice setup for someone with 17" wheels.

[72OBSESSED]

Pm sent

[MillerBuilt]

Originally Posted by Tinker

Thanks Jay, that was my original thought, but the calipers in this kit are the billet versions which have a 13" max rotor diameter. I was going to state that in the original post so these would make a nice setup for someone with 17" wheels.

Tinker - for what it is worth, both the "Forged" (FNSL's) & the "Billet" (BNSL's) can be installed onto 14" rotors. Your "Billet" calipers are what Wilwood sold prior to the "Forged" caliper offering on every 14" kit.

Didn't mean to hi-jack the thread, just thought the info would save you hundreds. Good luck with the sale!

[Tinker]

Jay, I really do appreciate comments like this. It's great when we have each other's back, isn't that what this whole forum is for?

[Tinker]

Sold. Thanks everyone.