Wheel advise:)

[Carlsson]

Another quick sketch in photoshop...

[Carlsson]

One thing I wonder over that maybe some of you will know or have experience of: I have purchased a wilwood brake kit front/rear and on the front kit it says that this will change the offset with +.19...
This makes me a little worried since I think it's pretty tight in the front as it is.
It will go with a ridetech level 2 kit if that matters.

Is there some offset on wheels/sizes that "I'll be safe with"?
Think I will go with 18" but maybe it can be 17" in the front..

[Carlsson]

Ok, not much of feedback in this thread
C'mon, I need all you wheel experts, designers and everybody else now:

I found "motegi racing" and got a "good deal" in Sweden and are strongly thinking of two of there wheels! Mr402 and mr403.. I'm usually not a fan of polished wheels but this 5 spoke is really growing on me...
If it will be the 402 I think I go with some other color on the spokes.
403= 17" or 18"
402= 18"

Any thoughts?

[l2azorback]

I would recommend going with forgelines or rushforths....I personally run forgeline Z3XPs