OMG! Another second gen Camaro, from down under!

[jaba]

Cheers guys!

Motor is finally out and gone!



Also received my fuel system parts from Summit today.



Aeromotive phantom 340 in tank fuel system to suit the carby style ricks tank. And a corvette regulator / fuel filter combo with - 6 fittings on each end.

Super impressed with the quality and finish of the pump system and it is quite a nice unit. The kit includes pre filters, foam baffling to avoid fuel surge and is completely universal as long as your fuel tank is between 5.5" - 11" deep.

This particular single pump model is good for up to 850HP N/A or 700HP FI, which should be plenty for now, if not its quite simple to swap to the dual pump 1200HP units.



Plan is to run braided line from the pump to the regulator, and hardline the rest of the way to the fuel rail.

My rear floor pan is also on the way so the metalwork will begin shortly. Not sure what to do for the firewall at the moment, would like some kind of beadrolled shape but unsure of what will look tidy without being to complicated or over the top.