Abs standalone system

[raustinss]

Well wtf....have to look into that one thanks . I'm not a big computer tech kinda guy . Just never really had an interest or learned

[craig510]

http://www.miataturbo.net/build-thre...into-nb-73579/

It looks like the nb Miata setup can be used. Integrated controller and pump. Wiring diagrams are at the bottom of the page. It has separate front and rear fluid paths so it can be used with a bias bar but is only 3 channels and no software support so it is mostly for keeping from flat spotting.

They are only a couple hundred bucks on eBay. I have bee thinking of getting one and see if I can get it to read c5 speed sensors.

[Charley7]

Originally Posted by Sparks67

You can follow this thread here on the ABS setup on Camaro XV. https://lateral-g.net/forums/show...=39584&page=69

The Bosch setup was used on Camaro XV, and it is rather expensive to put on a car.

Jeff

Originally Posted by craig510

http://www.miataturbo.net/build-thre...into-nb-73579/

It looks like the nb Miata setup can be used. Integrated controller and pump. Wiring diagrams are at the bottom of the page. It has separate front and rear fluid paths so it can be used with a bias bar but is only 3 channels and no software support so it is mostly for keeping from flat spotting.

They are only a couple hundred bucks on eBay. I have bee thinking of getting one and see if I can get it to read c5 speed sensors.

Thanks guys. I'll check them out.
Charley

[raustinss]

The problem with anything miata related is it just can't handle nor was designed to operate on cars this heavy most of our muscle cars are quite a bit more then miata . .like a pure minimum of 500 lbs . I don't think a miata even weights over 2700 lbs (sold cars for a mazda dealership 15 yrs ago)

[Charley7]

Originally Posted by raustinss

The problem with anything miata related is it just can't handle nor was designed to operate on cars this heavy most of our muscle cars are quite a bit more then miata . .like a pure minimum of 500 lbs . I don't think a miata even weights over 2700 lbs (sold cars for a mazda dealership 15 yrs ago)

My nova weighed in at 3000lbs was 2780 before I changed it from stock form.
A 4l60e is fat compared to a Muncie.


Charley

[raustinss]

Sorry Charlie , that was more geared for the camaro...chevelle guys. Yes in that case you would be within the "dynamics" of a miata ...the question then goes back to if the sensors and module will talk to each other

[Charley7]

Originally Posted by raustinss

Sorry Charlie , that was more geared for the camaro...chevelle guys. Yes in that case you would be within the "dynamics" of a miata ...the question then goes back to if the sensors and module will talk to each other

No worries. Yeah but I think the Miata is a 3 channel system.
Getting closer. I've now joined the corvette forum. I've read thru the stielow build he's used that Bosch kit that is big money. But has used the vette unit a few times with great success.

Charley