1st Gen Camaro Stereo System.

[rickpaw]

Originally Posted by 130fe

The TMI ones might. They are pretty sturdy pieces, I am going to use them and their one piece headliner.

Chris,

Do you have a link/picture to the TMI A pillars? I looked on their website, under 1st gen product category, and have not been able to find it.

[Corey R.]

Originally Posted by rickpaw

Chris,

Do you have a link/picture to the TMI A pillars? I looked on their website, under 1st gen product category, and have not been able to find it.

The A & B pillars are part of the headliner kit. There are references and photos in the install manual.

[Musclerodz]

Just finished a system with the shop kick panels. After trying to sort out balance issues I would much prefer speaker in the door which would require custom door panel and tweeter up high either a pillar or top of door. The issue is you have alot of reflectivity of sound off the rear glass pushing the sound forward and with the front speakers buried under the dash, its hard to get a good balance from them. If was able to move the tweeters up high it would definitely help alot. I have been looking at moving to a pillars but its alot of work in a done car.