A Subframe to Out Do Them All!

[GEARBOXGARAGE]

Originally Posted by Ben@SpeedTech

To squeeze 315s in there and maintain a 30 deg turning radius we had to create widened front inner fenders which are available on our website.

Hey Ben, any chance you guys will offer widened inner fenders for GM A body?

[Blake Foster]

Originally Posted by GEARBOXGARAGE

Hey Ben, any chance you guys will offer widened inner fenders for GM A body?

probably not. the 69 GTO we did was pretty easy we just split them and added a 2" wide strip to them. the problem is there are so many differences between the models and years. and it is not our core business. we have found that the 69 Camaro inners are a really good start and then modify them to fit your application.

[cpd004]

With Wilwood Corvette brakes up front, will any C5 or C6 wheel offered on a Corvette bolt up front to use as a temporary roller? I think the smallest offering in a C5 was 17x9.5.

[Blake Foster]

Originally Posted by cpd004

With Wilwood Corvette brakes up front, will any C5 or C6 wheel offered on a Corvette bolt up front to use as a temporary roller? I think the smallest offering in a C5 was 17x9.5.

the Corvette wheel will probably not fit with wilwood calipers you can down load the caliper template on the Wilwood site an check it to the wheel in question.
keep in mind you can always just not install the calipers until your ready to put the final wheels on.

[cpd004]

Originally Posted by Blake Foster

the Corvette wheel will probably not fit with wilwood calipers you can down load the caliper template on the Wilwood site an check it to the wheel in question.
keep in mind you can always just not install the calipers until your ready to put the final wheels on.

Perfect! Thanks!