Dreamin Ta's

[Panteracer]

I went by the engine builders shop on my way home today
He was pulling the last of the pistons. Good news is the bearings were
so good he said he could almost reinstall them. Cylinders are good,
going to send the crank out to double check for cracks and straightness
Rods will be checked but are lightweight La Billit kyrptonite so bomb proof
Pistons are good but dished and I want to kick the compression up from 9.5/1 to 11/1. He is talking to Kasse about another engine and will discuss mine next
regarding the solid roller cam
180 Headers dropped off at Sanderson today... Next to Brizzo's shop

Good news so far. Also going to run an O2 sensor as things were a little rich and giving up some HP

Bob