Brake rotor centering - Lateral-g Forums

**WSSix** · #1 06-09-2018, 06:13 PM

So I think I may have fixed the vibration today. I lifted the rear of the trans about half a degree and that seemed to do it. Not sure why as the last time I made an adjustment I had all my angles within spec when I measured without the driveshaft in place. I think the difference may be that I measured with the driveshaft in place this time and that showed that I was a little off from what I measured before. I would have though the measurements with the driveshaft removed would be more accurate since it allowed me access to the tailshaft.

Anyway, I'm going to work on closing the tunnel in now. I'll have to make a new transmission cross brace because the exhaust is almost pinned against it now. No big deal as I have to replace the floor boards too so it'll work out.

**GregWeld** · #2 06-09-2018, 06:15 PM

Great to hear trey!!!!

**WSSix** · #3 06-09-2018, 06:16 PM

Thanks! How the hell did you see this post so fast, lol?

**GregWeld** · #4 06-09-2018, 06:26 PM

Quote:

Originally Posted by wssix

thanks! How the hell did you see this post so fast, lol?

Magic!

**glassman** · #5 06-10-2018, 03:41 PM

when did the vibrations come on?
mine has vibrations, but only above 85 on the open highway, doesn't do it on the track or auto-x (no harmonics i'm guessing)

jarhead · #6 06-10-2018, 04:06 PM

Score!

Che70velle · #7 06-16-2018, 07:50 AM

Great news sir!
When is the next caffeine and octane? You haven’t moved yet have you?

**WSSix** · #8 06-22-2018, 02:21 PM

Next C&O is July 1, Scott.

Only moving I've done is from Sandy Springs to Dunwoody because I bought a house back in October of last year.

I haven't really done anything more with the car as I've been in Germany for 10 days. I leave on Tuesday for Tacoma, too. Doubt I'll do anything this weekend, but we will see.

Thanks!