Steering issue!!what could be the reason?

[Blake Foster]

typically this is normal. once you get the toe set you will see that there is about. 1/2 to 3/4" of thread engagement. this is the way unisteer designed them and the way they produce them. we have never seen any issues with this in the last 10 years. we have asked them to lengthen the tie rods to no avail. maybe your contact there has a better explanation?

[72Z/28]

Originally Posted by Blake Foster

typically this is normal. once you get the toe set you will see that there is about. 1/2 to 3/4" of thread engagement. this is the way unisteer designed them and the way they produce them. we have never seen any issues with this in the last 10 years. we have asked them to lengthen the tie rods to no avail. maybe your contact there has a better explanation?

Thanks Blake for your valuable contribution and support as usual. You are right, their tie rods seems to be a bit short and difficult to keep the 1 inch thread engagement as recommended by Unisteer. I guess now I don’t have to worry about that since you have shared this valuable input