C6 pedal 25835421 modifications

[nicks67ca]

I believe this bracket has built in stops where the pivot action is. The actual length of arm are not related to the sensor. The bracket is just a simple multi bolt flange that can be modified. DSE sells a bolt in bracket for gen 1 Camaros that can be modified to fit your application.

[dontlifttoshift]

I have cut and welded the pedal arms before.

Fun Fact: 69 Corvette throttle pedal trim snaps right on to that pedal like stock.

[jh99]

Yes it should be easy to modify. I just did not know if it was safe to take the sensor out to do the modifications and then have the assembly powder coated. Here are a couple of pics from a few years ago showing the way I mounted the Lokar pedal. The car is 99% finished now so all of that surface rust is gone!

The corvette pedal is longer than the Lokar so I will have to make the pedal fit the existing mount that I put in the car.

[IMG]pedal mount by Jeremy Haddox, on Flickr[/IMG]

[IMG]pedal mount 1 by Jeremy Haddox, on Flickr[/IMG]

[130fe]

Have you looked at using the 2007 Monte Carlo pedal? GM part #15831256. I used it instead of the vette pedal that came in my GMPP harness.

[jh99]

Originally Posted by 130fe

Have you looked at using the 2007 Monte Carlo pedal? GM part #15831256. I used it instead of the vette pedal that came in my GMPP harness.

No I have not. Howell gave me the corvette part number. Is this pedal compatible?

[cjsgarage]

Originally Posted by jh99

No I have not. Howell gave me the corvette part number. Is this pedal compatible?

I have used them interchangeably.


Sent from my iPhone using Tapatalk

[andrewb70]

Originally Posted by jh99

Is this pedal compatible?

Yes.

Andrew

[jh99]

Originally Posted by cjsgarage

I have used them interchangeably.


Sent from my iPhone using Tapatalk

Originally Posted by andrewb70

Yes.

Andrew

Thanks guys. The monte carlo ss pedal will be a lot easier to fit into the car. I have one on order.