Be careful when using demo versions of software. Nothing is free. Sometimes the company will disable features or handicap the software. The demos are for showing how the software works, not for 100 percent actual calculations. I input all the same numbers in my purchased version and it comes up with a roll center height of 8 inches. Right where your panhard bar is mounted.
__________________
Chris
1969 Firebird: injected Pontiac 462ci, T56
The Following User Says Thank You to Tinker For This Useful Post:
Make sure your dimensions are entered for the correct end of the links. Click on the link in the diagram and it will highlight the cell where the data is entered. Verify that the end you clicked on is the correct end of the link.
that's cool and all but you can get those numbers with a pencil and a piece of paper. draw your pickup points in 1/2 scale and project the lines and measure the roll center. doing rear 3 link rear suspension is no big deal.
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Hybrid Mode
