Camaro LT5

[Stielow]

Because the DSE kit is based around a 4th gen Camaro master. I just copy the 4th Gen Camaro clutch pedal geometry. I purchased a stock 1992 Camaro Clutch pedal along time before all these stuff was available so I just use it as a template.

Here is the 69 vs 1991 pedal.




Sent from my iPhone using Tapatalk

[srode1]

Originally Posted by Stielow

Because the DSE kit is based around a 4th gen Camaro master. I just copy the 4th Gen Camaro clutch pedal geometry. I purchased a stock 1992 Camaro Clutch pedal along time before all these stuff was available so I just use it as a template.

Here is the 69 vs 1991 pedal.




Sent from my iPhone using Tapatalk

Curious, did you install a top of clutch switch or bypass it with a jumper to fool the controller? I didn't see any reference or pictures on it, but might have missed it, or maybe its part of the pedal system you used.

[Stielow]

Originally Posted by srode1

Curious, did you install a top of clutch switch or bypass it with a jumper to fool the controller? I didn't see any reference or pictures on it, but might have missed it, or maybe its part of the pedal system you used.

Yes I did because I needed it for the cruise control also


Sent from my iPhone using Tapatalk

[89 RS]

Great build Mark, always raising the bar!