Collateral Damage- My 70 Chevelle site build

09-24-2020, 08:08 PM

camcojb camcojb is offline

Administrator

Join Date: Jul 2004

Location: Wilton, CA.

Posts: 13,165

Thanks: 6,480

Thanked 1,958 Times in 884 Posts

Got the Baer brakes yesterday so I did a quick mock up so I could get the front wheels on and the chassis on the ground. Everything fit perfectly, no drama or "hotrodding" required.

Next up I'm going to pull the body off and get it on a rotisserie to do the inner tubs and cut the tunnel for trans clearance. Then get the body on the new chassis and finalize engine placement with the adjustable motor mounts.

Attached Images

__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness
Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes
Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank

The Following 2 Users Say Thank You to camcojb For This Useful Post:
syborg tt (09-24-2020), WILWAXU (09-24-2020)