Project "Eastbound" 1978 Trans Am

[qnitro]

Wheel travel is about 3 inches, Im going to change the rear springs, they came with the car, and now that Im full weight(darn near, I have gas in tank) might need to swap. Wheels are 18x12 with a 335/30 I think is 25.9. The guys at 417 Motorsports killed the wheel arches.. there is Plenty of room..

Originally Posted by WSSix

Stance is spot on. What's your overall wheel diameter in the rear? How much travel do you have? I really would like to bring my car down lower, but I worry I won't have good travel.

[ScotI]

Originally Posted by qnitro

Wheel travel is about 3 inches, Im going to change the rear springs, they came with the car, and now that Im full weight(darn near, I have gas in tank) might need to swap. Wheels are 18x12 with a 335/30 I think is 25.9. The guys at 417 Motorsports killed the wheel arches.. there is Plenty of room..

Math says 'yes' on that 25.9 number for the height.
417 Motorsports did very well on the tubs if there's 3" of compression travel there.

[qnitro]

Yeah they pulled all the metal out custom tubs and built a 1/4 lip.. its super nice

Originally Posted by ScotI

Math says 'yes' on that 25.9 number for the height.
417 Motorsports did very well on the tubs if there's 3" of compression travel there.