...

Go Back   Lateral-g Forums > Technical Discussions > Transmission and Rear End
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 07-30-2021, 10:18 AM
gnx7's Avatar
gnx7 gnx7 is offline
Senior Member
 
Join Date: Aug 2012
Location: Bay Area, CA
Posts: 668
Thanks: 4
Thanked 62 Times in 35 Posts
Default

My customer got it running... Said it shifts like butter! He is super pleased.
Reply With Quote
  #2  
Old 10-18-2021, 08:20 AM
PBarkley's Avatar
PBarkley PBarkley is offline
Member
 
Join Date: Sep 2014
Location: Acworth, GA
Posts: 67
Thanks: 11
Thanked 21 Times in 8 Posts
Default

Slightly older thread, but figured I would throw in my $0.02...

The WCT5 was not holding up to the mid 300hp SBF in my foxbody, probably to nobody's surprise. I ended up getting a close ratio TKX setup (0.81 O/D) from SilverSport and I've been beyond pleased with it. Shifts are crisp but not notchy, and they feel precise like the CD009 that was in my 370Z. The gear ratios are perfect for the power this car is making and I'm sitting right at 2500RPM on the highway at 70mph. I feel it was a great investment for the car, worth every penny.
__________________
- Peter -- 66 Le Mans - 93 LX 5.0 --
Reply With Quote
The Following User Says Thank You to PBarkley For This Useful Post:
camcojb (10-18-2021)
  #3  
Old 10-18-2021, 04:58 PM
Lonnie's Avatar
Lonnie Lonnie is offline
Junior Member
 
Join Date: Apr 2021
Location: Pittsburgh, PA
Posts: 3
Thanks: 0
Thanked 2 Times in 2 Posts
Default

Same here... the TKX has a similar feel to a T-56 Magnum, with smooth shifts at 7000rpm.

I'm pleased, and do not miss the Muncie transmission at all.
Reply With Quote
The Following User Says Thank You to Lonnie For This Useful Post:
68454RS (10-19-2021)
  #4  
Old 10-19-2021, 09:03 AM
68454RS's Avatar
68454RS 68454RS is offline
Senior Member
 
Join Date: Mar 2019
Location: Huntington Indiana
Posts: 299
Thanks: 235
Thanked 251 Times in 124 Posts
Default

1968 Camaro with a 454ci, 3:55 gears, 26.68 diameter tire (possibly going to a 27.15 in the future)
Right now with the Muncie M-20, I'm turning 3200rpm at 70mph. Staying with the 2.87 fist gear, What OD ratio would you suggest?

If my math is correct;

.81 should put me at 2592 rpm @ 70mph
.68 should put me at 2176 rpm @ 70mph

This is just a cruiser car and I have a lot of long straight roads around me. I do a little auto X and would like to cruise comfortably on the interstates.
Reply With Quote
  #5  
Old 10-19-2021, 07:33 PM
Lonnie's Avatar
Lonnie Lonnie is offline
Junior Member
 
Join Date: Apr 2021
Location: Pittsburgh, PA
Posts: 3
Thanks: 0
Thanked 2 Times in 2 Posts
Default

Depends on how low of an RPM the car will tolerate.
Cam choice is a big factor.

Can you drive the car smoothly at 2000 rpm in 4th?
What is the lowest it will tolerate?
What speed do you drive the most & how often to you like to shift?

My car has 4.10's & does not like to be under 2000rpm, (it idles at 1300) so I chose the .81 & can now drive it in 5th at most speeds over 45.
It keeps me from shifting constantly, and I did not intend on a long distance highway car though.

Last edited by Lonnie; 10-19-2021 at 07:43 PM.
Reply With Quote
  #6  
Old 10-20-2021, 08:20 AM
68454RS's Avatar
68454RS 68454RS is offline
Senior Member
 
Join Date: Mar 2019
Location: Huntington Indiana
Posts: 299
Thanks: 235
Thanked 251 Times in 124 Posts
Default

Quote:
Originally Posted by Lonnie View Post
Depends on how low of an RPM the car will tolerate.
Cam choice is a big factor.

Can you drive the car smoothly at 2000 rpm in 4th?
What is the lowest it will tolerate?
What speed do you drive the most & how often to you like to shift?

My car has 4.10's & does not like to be under 2000rpm, (it idles at 1300) so I chose the .81 & can now drive it in 5th at most speeds over 45.
It keeps me from shifting constantly, and I did not intend on a long distance highway car though.
Maybe a 6 speed with .80 and .63 would suit me better
Reply With Quote
  #7  
Old 10-21-2021, 03:03 PM
Lonnie's Avatar
Lonnie Lonnie is offline
Junior Member
 
Join Date: Apr 2021
Location: Pittsburgh, PA
Posts: 3
Thanks: 0
Thanked 2 Times in 2 Posts
Default

That is ideal as long as you are willing to deal with potential floor modifications as the T-56 is much bigger.
Reply With Quote
The Following User Says Thank You to Lonnie For This Useful Post:
68454RS (10-22-2021)
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 11:24 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net