I have had similar issues related to the BIM. You can go into the BIM settings and change the bus address of the BIM. I’ve solved a couple of strange issues changing the address. There is four address options if I remember right.
Having the BIM and a scanner connected at the same time can also cause some strange things to happen depending on the style of Y connector you use on the port.
Don
The Following User Says Thank You to dhutton For This Useful Post:
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Threaded Mode