1968 Camaro Build - Third time's the charm

[CMillwheels]

Originally Posted by Steve68

I want to know what inner wheel wells did you use???

Looking at the wiring harness's do you have a harness coming out of each side of the firewall??? noticing the hole on the drivers side,

Hey Steve - the inner fender wells are Speedtech fiberglass. On the wiring, I have the body harness in the stock location and the engine harness is coming through the hole I installed on the driver’s side. The PCM is located under the dash and the engine fuse box is located on the drivers side core support. I had to completely rework the harness to make this work but I really wanted the PCM under the dash inside the car. Here’s a few more pics of the wiring and where I installed the PCM.