...

Go Back   Lateral-g Forums > Technical Discussions > Chassis and Suspension
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 03-10-2023, 11:59 AM
Jimmy Sean's Avatar
Jimmy Sean Jimmy Sean is offline
Senior Member
 
Join Date: May 2005
Location: Missouri
Posts: 197
Thanks: 8
Thanked 28 Times in 12 Posts
Default If you have or want a Lateral Dynamics subframe, you may want to read this!

I purchased mine last year in Feb, it was delivered in June. It was the 5th one built. I was told it would be a 6-8 week build, none the less I did get it and all the parts. I've experienced a number of issues.

First was the engine mounts didn't line up. Easy enough to deal with. Then there was the fact that the body mounts didn't line up, they were off an inch rearward. I hogged the mount out and was able to line it up to were it didn't bother me visually. The transmission crossmember mounting holes didn't line up with the subframe. And the big one was and the one that just happened was the upper control arm mount bent and then failed. In my opinion the mount bent because of the upper shock mount bending the plate into the cross shaft of the control arm, which then increased the leverage on the thin portion of the shock mount and it broke. The passenger side was worse than the drivers side. I suspect that my car was the first one on the road with this subframe.

The Motor Mounts




The Sub Frame issues








Transmission Crossmember Issue






The Shock/A-Arm Mount Failure



__________________
1969 Firebird, L-76 LS2, T56, Speed Tech Torque Arm, Build Thread
Instagram @jimmysean69
Reply With Quote
The Following 4 Users Say Thank You to Jimmy Sean For This Useful Post:
camcojb (03-10-2023), fleetus macmullitz (03-13-2023), Ketzer (03-11-2023), Tinker (03-22-2023)
  #2  
Old 03-12-2023, 05:57 PM
-KILO- -KILO- is offline
Lateral-g Supporting Member
 
Join Date: Aug 2014
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Default

thanks for the feedback!

a good lesson for me who is looking at getting an aftermarket subframe for my 69 Camaro: I should go with DSE or another long proven name. The extra $ is worth it to help better avoid potential issues like this.
Reply With Quote
  #3  
Old 04-16-2023, 09:13 PM
DRJDVM's '69's Avatar
DRJDVM's '69 DRJDVM's '69 is offline
Senior Member
 
Join Date: Jul 2004
Location: Manteca, CA
Posts: 1,299
Thanks: 2
Thanked 48 Times in 26 Posts
Default

I'm only a novice DIY home welder but a lot of those weld looks really cold with poor penetration to me.
Reply With Quote
The Following 3 Users Say Thank You to DRJDVM's '69 For This Useful Post:
camcojb (04-16-2023), Ketzer (04-17-2023), Tinker (04-17-2023)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:49 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net