Hobbs Camaro (Old Drag Car)

[EVIL SS]

Originally Posted by Stielow

The Detroit Speed subframe works well with a 18x10 front with a 20 mm offset or 6.25 backspacing. The rear we ordered a 18x12 with the most backspacing that Forgeline could do in there forging. Off memory it as 19 mm offset 7.25 backspacing.

I think I will have 2 sets of brakes for this car. The track setup with the Brembo and Monoblock Forgeline wheel (Pictured below).

Thanks Mark! Is this the same setup as your LT5 car with custom hats? I'm still looking for a good front brake setup for my LT5 build.

[Stielow]

Originally Posted by EVIL SS

Thanks Mark! Is this the same setup as your LT5 car with custom hats? I'm still looking for a good front brake setup for my LT5 build.

Yes similar set up. I had Howell make custom rotors for the back with the stock ZR1 hats.

Brakes are a personal choice. I like the Brembo stuff because I know it and I know the Brembo engineers, both on the production side and the racing side.

I know a lot of people are use a lot of other brands with no issues.


Sent from my iPhone using Tapatalk