2nd Chance Camaro - Let the Project Begin - Lateral-g Forums

**andrewb70** · #1 10-02-2023, 06:43 PM

I forget where I saw the funnel being used for the first time, but after I tried it, I was sold.

Andrew

Cramer4918 · #2 10-03-2023, 06:49 AM

I’m glad you’re making progress, Marty. It’s playing out like you said about the last 10%. Hopefully not much longer.

What PWM fan controller are you using?

**andrewb70** · #3 10-03-2023, 07:05 AM

Quote:

Originally Posted by Cramer4918

I’m glad you’re making progress, Marty. It’s playing out like you said about the last 10%. Hopefully not much longer.

What PWM fan controller are you using?

He has the C6/Ford Fusion control box.

Andrew

**syborg tt** · #4 10-03-2023, 09:28 AM

Quote:

Originally Posted by Cramer4918

I’m glad you’re making progress, Marty. It’s playing out like you said about the last 10%. Hopefully not much longer.

This quote is so true

The last 10% is 90% of the work.

and tonight I am removing the starter trying to figure out where the leak is coming from.

Possible the crank position sensor.

Sheck44 · #5 10-04-2023, 04:23 AM

Marty ... WOW, love the latest updates, especially with the videos, its always nice to see the man behind the work !!!

So awesome buddy, and everyone can clearly see by the garage that you are a true car-crazy enthusiast, that must be the largest how wheels collection I've ever seen !!

Cheers
Steve

**Ricochet** · #6 10-12-2023, 12:24 PM

Quote:

Originally Posted by syborg tt

This quote is so true

The last 10% is 90% of the work.

Truer words never spoken!

**syborg tt** · #7 10-13-2023, 02:49 PM

Flashback Post as it is hard to believe this is what I started with.

This was scary

and both of my girls are all grown up

I still have that bike that is hanging on the ceiling.

**syborg tt** · #8 10-13-2023, 02:50 PM

So both of my girls were home for a little bit so it was more about being with them than the car.

I feel like I didn't vent the drivers side when I burped the coolant system so I am adding a note.

This sucked but the good news is it fired right up.

Back to the car.

Car was doing some weird stuff after the battery went dead. So I asked Andrew to log back in and it's all better now.

Once again.

Andrew thank you very much

**syborg tt** · #9 10-13-2023, 03:27 PM

So now the search has begun to find the negative version of this battery terminal cover.

Took me a week to find it.

Anyone know where I put the headlight trim ring.

More Anvil goodie's

TMI Seats are going in.

It's weird to think I was one of the first to do an interior with them.

This HAPPENED !!

Time to perform surgery on my wrench.

Yes I poke a hole in my finger trying to get the snap ring back in.

Both my girls are ready to drive this car.

Very important Andrew note as I still need to wire up the AC kick on.

Huh, I wonder what this wire was for.

**syborg tt** · #10 10-14-2023, 09:24 AM

Out with the old and in with the New and the good news is the steering wheel is going to a good home right across the street.

Looks like I need to get out my steering wheel remover

I love this wheel from the guys at Screaming Chicken and I can't wait to put on the rest of the parts I grabbed from them.

Old Wheel getting ready to go to it's new home

Cleaned up the warehouse and moved the Flat Hood to safe place so I can get it painted over the winter.

and of course I found the Factory Valve Covers right after I bought a new set.