Angry Johnny's 69 Camaro Build

[Rodknock]

Originally Posted by ScotI

Well that's no-bueno....

You can say that again!!! The positive that came out of it was that at least I had color on the whole car, and I learned a lot about what not to do when painting.
My next post will be the second round which came out much better.

[Rodknock]

Second time around came out much better.
10/09/2024 was when I did this.

Here's a video right after finishing the base coat. From here I'll unmask the stripes and apply clear to the entire car

[WSSix]

Tough break on the first round of painting going so poorly. Glad you persevered.

I do like how you gave the stripes a pattern. That looks good.

[Rodknock]

For some odd reason, I can't get YouTube videos "shorts" to work properly. It always comes up with an error.
I guess I'll stick to pics for now.

The second time around came out much much better. It wasn't a windy day, and I bought the correct speed reducer. I also added a couple of puller fans on the exhaust side to help pull the overspray out. I had to sand the entire base coat with 800 wet, and then re-mask it all, then shoot it. By the time I was finished it was getting dark and the temp dropped from the 60's to the 40's in the booth the minute the sun set.

Base Applied



Clear Applied

[camcojb]

I was trying to fix the video for you, but I couldn't find it on youtube based of that id #.

[camcojb]

https://lateral-g.net/forums/showthread.php?t=14032

[Rodknock]