Holley 12.3 Pro Dash screen dimensions - Lateral-g Forums

ttmott · #1 04-14-2025, 06:23 AM

We need the actual height, width, thickness, and corner radius of the Holley 12.3 Pro Dash screen if anyone can help.
We've asked Holley Tech a couple of times and they only provide the body dimensions for a cutout.
We are in the process of 3D printing a dash and the screen needs to recess into that dash.
Thanks!

dontlifttoshift · #2 04-14-2025, 02:20 PM

https://www.holley.com/support/fuel_..._3in_pro_dash/

Cad files on this page.

ttmott · #3 04-15-2025, 04:46 AM

Thanks!
Forwarded to the designer - I think he can use STEP files.

ttmott · #4 04-24-2025, 06:06 AM

Quote:

Originally Posted by dontlifttoshift

https://www.holley.com/support/fuel_..._3in_pro_dash/

Cad files on this page.

I just wanted to say the CAD files were a BIG help. Our test print and "fit-check" 3D print of the Cuda' dash.
Thanks! I just don't know why our discussions with Holley Tech couldn't point us to the files......

**camcojb** · #5 04-24-2025, 08:40 AM

Wow, that looks great! Thanks to our members for the help.

232_ray · #6 05-03-2025, 10:39 PM

Quote:

Originally Posted by ttmott

I just wanted to say the CAD files were a BIG help. Our test print and "fit-check" 3D print of the Cuda' dash.
Thanks! I just don't know why our discussions with Holley Tech couldn't point us to the files......

If you decide to make an extra and wanna sell one let me know I need one for me ‘70 Cuda also. Thanks.

ttmott · #7 05-05-2025, 08:28 AM

Quote:

Originally Posted by 232_ray

If you decide to make an extra and wanna sell one let me know I need one for me ‘70 Cuda also. Thanks.

I'll ask - I know that each of the 4 pieces require over 30 hours of print time. So the compensation may be quite a lot. He is, right now, printing the PETG final pieces. The Holley display came in and the test fit was perfect.