1967-69 & 1970-81 Camaro/Firebird Dash Speaker Bracket

[Screaming-Chicken]

Made from .160" thick aluminum this bracket set allows you to install a pair of 4" speakers in the stock factory location without modifications. The aluminum won't flex and move around like plastic. Available for 1967-69, 1970-81 Camaros or 1970-79 Firebirds with or without speakers. Includes install hardware. Can also be used to mount 3.5" speakers or a pair of tweeters.

1967-69 Camaro/Firebird product page:
https://screamingchicken.com/1967-69...stall-bracket/

1970-81 Camaro & 1970-79 Firebird product page:
https://screamingchicken.com/1970-81...stall-bracket/

We also sell the brackets with Rockford Fosgate speakers.

[Screaming-Chicken]

Picture from an install in a 1981 Camaro

[JKnight]

Just bought mine this past week. One of those “while I’m in there” type of things doing the re-wire under the dash.

[Screaming-Chicken]

We added more speaker options to our dash bracket, you can now get the bracket with Pioneer, Kenwood or Rockford Fosgate speakers installed. All 3 have been installed in a car to verify fit. On a AC car the duct work can make the job frustrating but the new speaker set up is actually smaller than the original so that helps some.

1st gen Camaro/Firebird dash speakers at the link below:
https://screamingchicken.com/speakers-1st/

2nd gen Camaro/Firebird dash speakers at the link below:
https://screamingchicken.com/speakers-2nd/

[Screaming-Chicken]

Added the newest Rockford Fosgate P1 speakers and Audiocontrol speakers to our website for 1967-69 and 1970-81 Camaros & Firebirds recently. Both of these will take a lot of power from an amp so you can get plenty of sound from the front of the interior without cutting up the doors, kick panels or center console. We also added matching rear speakers and AudioControl amplifiers.

1st gen:
https://screamingchicken.com/collect...dio-alarms-1st

2nd gen:
https://screamingchicken.com/collect...dio-alarms-2nd