Watts link or panhard bar?

[mazspeed]

Originally Posted by Maximum Bob

Alert....

just spoke with Jim about Mazspeed's situation and he agreed, but did say it should fit with an aluminum cover.

He is going to send some pics over and I wll post them up.

As far as a re-design....Im thinking he would have to get three or four guys with the same problem or interest....tank/cover...

You would have to call him though.

The guys over at Campbell Auto called me when it was there and showed me that it would not fit with the aluminum cover and Rick's gas tank that we have. I assume that the tank is the exact same size as the stock unit. If you have a fuel cell, you can set it back a bit too clear the al cover, but it just did not work with our setup. It was close but we needed some space to make sure it would clear, and it did not. Maybe Kevin here can also solidify what I'm saying as he knows of the problem as well. If Jim makes it a bit slimmer, I will buy it again no problem. I think if this could be fixed, this could be a very cheap soloution to a 4 link as this will keep the rear end in line and make the car handle much better.