evil zee project update - Lateral-g Forums

evilzee28 · #1 05-09-2007, 11:55 AM

There was rust around the joint between the 1/4 & hinge panel, so I cut out the rust, formed a new piece & welded in a new section.

evilzee28 · #2 05-09-2007, 11:58 AM

The car originally had a vinyl roof, which when removed showed very badly pitted/corroded steel. I decided to lead load/body solder these sections to build the steel thickness back up to original.

evilzee28 · #3 05-09-2007, 12:00 PM

lead has been applied & then filed smooth.

evilzee28 · #4 05-09-2007, 12:02 PM

The hinge panel being leaded & then the finished item having been filed smooth.

awr68 · #5 05-09-2007, 05:25 PM

Looks great! Thanks for the pics...we do love them!!

ten1nchrubbers · #6 05-09-2007, 05:28 PM

.....

WicKeD_SS · #7 05-09-2007, 05:37 PM

Looking great keep us updated

evilzee28 · #8 01-28-2008, 05:07 AM

Here's an update on how things are going. The roof had a lot of corrosion across the front, so it was cut out & new metal welded in. That was then leaded ready for primer

evilzee28 · #9 01-28-2008, 05:09 AM

the cross ram airfilter arrived from the US last week

evilzee28 · #10 01-28-2008, 05:10 AM

An epoxy primer was sprayed over the whole shell & then a tinted 2K primer over that.