2nd Chance Camaro - Let the Project Begin - Page 109 - Lateral-g Forums

65 347 · #**1081** 09-22-2016, 10:32 PM

Some may say this is the best place for Marty, but hey some one had to do it.

Mike

**WSSix** · #**1082** 09-23-2016, 05:00 PM

Nice work, Marty. Have a friend who was having hood issues with a 70 SS Chevelle he purchased. He couldn't get the rear of the hood to lay down inline with the fenders. It was the cowl seal that was too stiff keeping the hood from laying flat. Changed it out to a Metro Molded or Soffseal piece, can't remember which, and it looks great now. I never would have thought the seal would be that strong. Personally, I only use Metro Molded or Soffseal. They seem to fit and feel the best. Good luck!

**syborg tt** · #**1083** 10-06-2016, 11:04 PM

Continuing to the rear of the car I have always felt that the tail panel needed to be black. So a quick call to Larry the Paint & Body guy and we both agreed it needed to be black.

So the minute his schedule opened up I would drive the car over.

Marty-MJ

**WSSix** · #**1084** 10-06-2016, 11:06 PM

Nice change to black with the tail panel, Marty.

**syborg tt** · #**1085** 10-06-2016, 11:08 PM

Where the bike rack bungs meet the body paint chipped a little bit. Nice easy solution was to paint the bungs black. I am also thinking about putting a circular warning sticker around the bungs before I put the bike tray back on.

Ps looking for ideas for the warning sticker

Marty-MJ

**syborg tt** · #**1086** 10-06-2016, 11:14 PM

I almost forgot (just like Kenny) Larry installed the passenger side mirror on the car for me.

Ps For anyone that doesn't know Kenny he hates mirrors and headrests. So the fact that my car had two headrests and a drivers side mirror when it came home was pretty shocking. What is a little more shocking is the fact that he painted both mirrors and actually sent them home with the car.

Marty-MJ

**grendel** · #**1087** 10-07-2016, 12:17 PM

Want a set of Dakota digital tail lights for it?

**syborg tt** · #**1088** 10-07-2016, 01:59 PM

Quote:

Originally Posted by 65 347

Some may say this is the best place for Marty, but hey some one had to do it.

Mike

I am certain my Wife would agree with you.

Quote:

Originally Posted by WSSix

Nice work, Marty. Have a friend who was having hood issues with a 70 SS Chevelle he purchased. He couldn't get the rear of the hood to lay down inline with the fenders. It was the cowl seal that was too stiff keeping the hood from laying flat. Changed it out to a Metro Molded or Soffseal piece, can't remember which, and it looks great now. I never would have thought the seal would be that strong. Personally, I only use Metro Molded or Soffseal. They seem to fit and feel the best. Good luck!

I am going to be ordering some more stuff from them as the windows struggle when I roll them up.

Quote:

Originally Posted by WSSix

Nice change to black with the tail panel, Marty.

Thank you I can't wait to get the taillights and the rear bumper on tonight.

Quote:

Originally Posted by grendel

Want a set of Dakota digital tail lights for it?

John, I do and I will be calling you shortly