Vinz68 camaro

[vinz68]

Originally Posted by ProdigyCustoms

Vinnie, before you go choping the rear, we need to make sure Forgeline can add 3" to the lip. I will write to Scott tonight and check the build sheet on the wheels to see what size outer lip you have now and make sure you can do the entire widening on the outer rim shell. The outer rim shells only come so wide, it may be that you have to go a half inch in and 2 1/2 inch out, or 1 inch in and 2 inch out. Anyway, I am writing Forgeline now. I will let you know what I find out

Thanks Frank I was getting ready to contact you.

[vinz68]

Originally Posted by Steve1968LS2

Don't feel bad.. mine have been there twice! lol

Great car, when the weather gets good again we will have to do a feature.

Thanks Steve you da man. I'll make sure you get a good burn out pic..lol

[ProdigyCustoms]

OK Vinnie, Here is the deal. I thought you already had 3" outer lips, and you do. The widest 18" outer rim shell is a 5", so you will have to run a 5" outer (exteend the outer 2") and change your 6" inner to a 7" inner (adding 1" to the inner making the overall wheel width 12") Which means IN THEROY, the rear needs to be narrowed 2" per side. I will talk to Jake about it before you get started. But I suggest you send the wheels to Foregeline, get them done. I have inner and outer shells reserved for you, it will take about 7 to 10 days total turn around from the time you ship them. Then get the tires / wheels mocked in the wheels wells and measure between the wheel hubs for the exact rear width.

If you need to call me

four zero seven 832 1752

[vinz68]

Originally Posted by ProdigyCustoms

OK Vinnie, Here is the deal. I thought you already had 3" outer lips, and you do. The widest 18" outer rim shell is a 5", so you will have to run a 5" outer (exteend the outer 2") and change your 6" inner to a 7" inner (adding 1" to the inner making the overall wheel width 12") Which means IN THEROY, the rear needs to be narrowed 2" per side. I will talk to Jake about it before you get started. But I suggest you send the wheels to Foregeline, get them done. I have inner and outer shells reserved for you, it will take about 7 to 10 days total turn around from the time you ship them. Then get the tires / wheels mocked in the wheels wells and measure between the wheel hubs for the exact rear width.

If you need to call me

four zero seven 832 1752

Thanks Frank I'm delivering the car to Jake's on Fri. Have a great Thanksgiving.

[68protouring454]

Well we are knee deep in vinnys camaro again. This winter its getting mini tubs, 8 point 1-3/4 .134 roll cage, mid mount fuel cell with cage mount, nitrous express, vintage air. will start a new thread on new work.

[dhondagod]

What? You posted with no pics!? Shame on you!

Did he ever get the rear wheel/tire combo worked out?


Chris


Edit: Never mind, just found the other thread....