Nice truck Nate. Centerbolt valve covers didn't come on an S-10. Cool. The one thing you may want to do is anchor that BSS fuel line going right over the passenger tailpipe. Besides the fire hazard part, it will warm your fuel up a lot more than you want, contributing to detonation.
In that configuration, it must be tough NOT to spin the tires in all gears.
Thanks for the compliments. I actually plan on relocating that line, that is just how it was sitting, the bed is not attached and the fuel line is just sitting there for mock up. I also plan on wrapping the fuel line in that fire tape, i do not want to risk a fire. I am axiously awaiting the day i can drive it, i'm sure its going to be a handful
OK, you can shoot me now, but here is the truck I use as a parts chaser. Yeah, it's a rice burner, but I don't want to rack up the miles on the "good" vehicles.
Just thought i would try and post a few pics of my trucks.The Blue one is a dailey driver.The black s10 is a future project.Brought it back from georgia this past fall.The body is mint,hopefuly will start on it this summer.
hey zz4, are those seats you have from summit? cause i have the same ones and from mocking them into my first gen, they are way too high. how did you get yours to sit so low? im thinking i have to make a portion of the floor flat just to get the seat low enough, and i am only 5' 9", head is 1" from headliner
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Linear Mode
