JCG Restoration & Customs Project Blu Balz

[Ron in SoCal]

Originally Posted by intocarss

Rat boy and Bubba Brad do nice work

Yeah they do. I'm gonna have to speak to them about putting Blue Balls ahead of me...

[Cris@JCG]

Scrub the engine with simple green.. Clean all surfaces with Acetone... Etching primer.. Paint..

Originally Posted by HotRod68Camaro

What was your process for cleaning and painting the block?

They like me better than you down their!!

Originally Posted by Ron in SoCal

Yeah they do. I'm gonna have to speak to them about putting Blue Balls ahead of me...

[intocarss]

Originally Posted by Ron in SoCal

Yeah they do. I'm gonna have to speak to them about putting Blue Balls ahead of me...

I can send the boyz over to have a chat LOL

[ScotI]

Originally Posted by Gonzo

Scrub the engine with simple green.. Clean all surfaces with Acetone... Etching primer.. Paint..

I'm in the midst of prep work on the block for some color @ home so I can get the bbc back into my DD/tow pig. I use a similar prep approach (simple green & acetone) but use typical 'home' materials to wipe away dirt & oil residue. This typically means recycled shop rags or those 'blue' shop paper-towels.

My issue is the 'lint-free' p-towels leave behind way more material than desired if any cleaning chems are used & the shop towels (clean as they look) still typically have an oily residue not good for helping paint products adhere.

What would you guys recommend for the driveway builds?

[MarkM66]

Originally Posted by ScotI

I'm in the midst of prep work on the block for some color @ home so I can get the bbc back into my DD/tow pig. I use a similar prep approach (simple green & acetone) but use typical 'home' materials to wipe away dirt & oil residue. This typically means recycled shop rags or those 'blue' shop paper-towels.

My issue is the 'lint-free' p-towels leave behind way more material than desired if any cleaning chems are used & the shop towels (clean as they look) still typically have an oily residue not good for helping paint products adhere.

What would you guys recommend for the driveway builds?

After you get it clean with the blue shop towels, blow any lint off with compresses air, and then tac rag it.

[Cris@JCG]

One of my machine shops called me today to come & proof the first piece off the machine.. We are good to go.. I will even be putting a set on my Snap On tool box & shop truck..





Also got the the fender washers proofed.. Got a small production lot in the works.. Then I will send out a few to get anodized in different colors..

[coolwelder62]

Wow!! Very nice.

[dunnjun]

Cool logo. R u going to fill in the letters with something?

[Cris@JCG]

Yes sir! Carbon Fiber.... I just got the sheets on Friday.. but have a few parts that I have to water jet in CF.. So I want to nest it all in one run.. I will be similar to the wheel stand on the pic..

Originally Posted by dunnjun

Cool logo. R u going to fill in the letters with something?

[dunnjun]

Very nice