1482 hp small block chevy for hot rod - Page 5 - Lateral-g Forums

TOM NELSON · #41 03-13-2006, 07:13 PM

The Turbine Wheel Is A Nelson Special.thats About All I Can Say.sorry Don't Me To Be A Ass But That Took Some Time To Fiqure Out.

turboteg · #42 03-13-2006, 09:16 PM

Quote:

Originally Posted by TOM NELSON

The Turbine Wheel Is A Nelson Special.thats About All I Can Say.sorry Don't Me To Be A Ass But That Took Some Time To Fiqure Out.

No problem Tom. Knowledge like that is what puts food on your
plate and toys in your garage, and I can understand that totally.

Turbo Deuce · #43 03-14-2006, 04:33 AM

Quote:

Originally Posted by TOM NELSON

The Motor Made 1025 Hp At 14 Pounds Of Boost And 32 Degrees Total Timing.5900 Rpm 1482 Hp At 29 Pounds Of Boost And 32 Degrees Timing 5600 Rpm.but Trust Me When You See The Video When The Motor Hits Beyond 1000 Hp It Jumps The Hp So Fast Its Hard To Read The Gauge It Would Have Made 1600+ But The Air Fuel Would Go From 11 To 1 To 13 In A Heart Beat So We Kept Having To Shut The Run Off Early.the Goal For David Was To Make A Streetable 1000 Hp And We Did That On Pump Gas .he Was Stoked.

Nice power! I read pump gas, but I see 32 degrees of timing at 29 psi. Can you go into a little detail? That seems high on C16, and I read pump gas.

**syborg tt** · #44 03-14-2006, 06:45 AM

the more i read about you the more i am considering sending you my v6

Speedster · #45 03-14-2006, 08:04 AM

Quote:

Originally Posted by syborg tt

the more i read about you the more i am considering sending you my v6

Marty -
I would highly recommend sending Tom your V6. You will be happy you did. Tom makes "good" power, meaning high and long term.

**syborg tt** · #46 03-14-2006, 09:35 AM

Quote:

Originally Posted by Speedster

Marty -
I would highly recommend sending Tom your V6. You will be happy you did. Tom makes "good" power, meaning high and long term.

yep it looks like i will be calling him and telling him what i've got

JUSTANOVA · #47 03-14-2006, 10:51 AM

that is ridiculous, what would it cost do duplicate(have you build one for me)?

**syborg tt** · #48 03-14-2006, 11:41 AM

Quote:

Originally Posted by JUSTANOVA

that is ridiculous, what would it cost do duplicate(have you build one for me)?

Actually ridiculous isn't the right word - Awesome would be the word i would choose.

ProStreet R/T · #49 03-14-2006, 11:50 AM

Quote:

Originally Posted by JUSTANOVA

that is ridiculous, what would it cost do duplicate(have you build one for me)?

Ooh ooh this could be fun, lets take guesses on the build tally.

I'll say total motor, turbo kit, excluding efi and tuning. $27k

I'm assuming hot side is done in mild steel and off the shelf internals.

**syborg tt** · #50 03-14-2006, 11:56 AM

Quote:

Originally Posted by ProStreet R/T

I'll say total motor, turbo kit, excluding efi and tuning. $27k

i have 25 into my little v6