...

Go Back   Lateral-g Forums > Technical Discussions > Engine
User Name
Password



Reply
 
Thread Tools Display Modes
  #1  
Old 04-22-2009, 12:38 AM
scherp69's Avatar
scherp69 scherp69 is offline
Lateral-g Supporting Member
 
Join Date: Dec 2007
Location: British Columbia, Canada
Posts: 882
Thanks: 0
Thanked 4 Times in 2 Posts
Default Drive by wire throttle vs GM electronic foot pedal

Hopefully this is the right place to put this. I'm just filling in a few more holes in my firewall before I get ready to lay some primer on it. Once I get to the point of getting a motor, I will be getting the GM LSX376 if it's actually out and if not, the LS3. My question though is..which throttle option is better: drive by wire throttle or GM's electronic foot pedal? If I go with the GM one, can I fill in the accelerator pedal and drive by wire holes? Thanks in advance.
__________________
Mike

Pro Touring 68 Acadian(Nova)
Speedtech subframe with high clearance control arms
Prodigy Bar rear suspension
Ridetech single adjustable coilovers
Wilwood 12.2" brakes
New Gen Splitters
LS3 and TKO600

Link to my build: https://lateral-g.net/forums/showthread.php4?t=14349

Reply With Quote
  #2  
Old 04-22-2009, 12:43 AM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 12,904
Thanks: 5,576
Thanked 1,595 Times in 716 Posts
Default

I would make that decision depending on what efi controller I was going to run. If you're using an aftermarket setup then a cable throttle is mostly required, but the factory ECU's that run throttle by wire would have me using that setup.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote
  #3  
Old 04-22-2009, 01:20 AM
WILWAXU WILWAXU is offline
Lateral-g Supporting Member
 
Join Date: Mar 2008
Location: San Diego, CA
Posts: 1,012
Thanks: 1,207
Thanked 131 Times in 86 Posts
Default

Yup. The GM harness kit comes with the pedal assembly.

If you decide to do something else, Lokar is making a nice throttle cable setup.
__________________
John Brown
Instagram @wilwaxu
Facebook @wilwaxu
Reply With Quote
  #4  
Old 04-22-2009, 02:02 PM
scherp69's Avatar
scherp69 scherp69 is offline
Lateral-g Supporting Member
 
Join Date: Dec 2007
Location: British Columbia, Canada
Posts: 882
Thanks: 0
Thanked 4 Times in 2 Posts
Default

Thanks guys. I guess what I'm wondering though....is there a benefit to either set up? I see some companies will rewire a electronic to a wire set up. Does one give better throttle response, etc? That's more what I'm wondering.
__________________
Mike

Pro Touring 68 Acadian(Nova)
Speedtech subframe with high clearance control arms
Prodigy Bar rear suspension
Ridetech single adjustable coilovers
Wilwood 12.2" brakes
New Gen Splitters
LS3 and TKO600

Link to my build: https://lateral-g.net/forums/showthread.php4?t=14349

Reply With Quote
  #5  
Old 04-22-2009, 06:48 PM
thedude327 thedude327 is offline
Senior Member
 
Join Date: Nov 2008
Location: Brighton, Mich.
Posts: 189
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by scherp69 View Post
Thanks guys. I guess what I'm wondering though....is there a benefit to either set up? I see some companies will rewire a electronic to a wire set up. Does one give better throttle response, etc? That's more what I'm wondering.
Drive by wire can give very good throttle response, but it needs to be calibrated for the specific application. If not calibrated correctly, you can end up with holes (meaning when you step into the throttle, you may get no response, then when you step in a little more or in some cases alot more, you get too much) Also, when driving at low speeds and tipping in or out of throttle, the transitions may not be very smooth without a good calibration in place. Something to think about. Good luck with whatever you choose !!

Paul
__________________
1973 Z28 Street-touring project.........
Reply With Quote
  #6  
Old 04-22-2009, 10:01 PM
scherp69's Avatar
scherp69 scherp69 is offline
Lateral-g Supporting Member
 
Join Date: Dec 2007
Location: British Columbia, Canada
Posts: 882
Thanks: 0
Thanked 4 Times in 2 Posts
Default

Thanks Paul. Does anyone know of any issues/drawbacks with the gm electronic pedal?
__________________
Mike

Pro Touring 68 Acadian(Nova)
Speedtech subframe with high clearance control arms
Prodigy Bar rear suspension
Ridetech single adjustable coilovers
Wilwood 12.2" brakes
New Gen Splitters
LS3 and TKO600

Link to my build: https://lateral-g.net/forums/showthread.php4?t=14349

Reply With Quote
  #7  
Old 04-23-2009, 01:30 AM
WILWAXU WILWAXU is offline
Lateral-g Supporting Member
 
Join Date: Mar 2008
Location: San Diego, CA
Posts: 1,012
Thanks: 1,207
Thanked 131 Times in 86 Posts
Default

Last time I talked to Speatech there wasn't a cruise control available for the throttle by wire setup. But that was over six months ago, may have changed.
__________________
John Brown
Instagram @wilwaxu
Facebook @wilwaxu
Reply With Quote
  #8  
Old 04-23-2009, 08:57 AM
XcYZ's Avatar
XcYZ XcYZ is offline
Administrator
 
Join Date: Jun 2004
Location: Rochester, Minnesota
Posts: 8,998
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I wasn't sure about the ETC before I did the LS7 swap, I didn't know if it would have decent throttle response... but I'm extremely happy with it. It definitely doesn't hurt performance.
__________________
Scott

My LS7 69 Camaro
Reply With Quote
  #9  
Old 05-14-2009, 03:13 AM
JamesJ JamesJ is offline
Senior Member
 
Join Date: Jan 2005
Location: Houston, TX
Posts: 820
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I think that that only drawbacks to the Cable is then you have to have another hole in the firewall, and have to route the cable (Not that hard). I dont mind the idea of drive by wire, but to me I like the idea of a cable on an old car.
__________________
James J.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:05 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright Lateral-g.net