Hello to all, I've been browsing this website for some time now, and there are a lot of cool rides out there. Props to all the hard work. I thought I would post my project, because I have enjoyed the car show from my home and wanted to join in on the fun.
So, this is my car. I have owned my 1969 Pontiac Firebird for 20 years now, and it is never finished. I drove it for one summer before I started to tear it down. The car was completely restored to original condition on the outside, but had a 462ci/TH-400 combo w/ 3.55 posi.
Over the years it had tri power, single quad, 358ci and back to 462ci w/ EFI. Two years ago I smoked the tranny and it hasn't moved since. I now have been accumulating parts, and need to get out there it build it. Here's the recipe:
462 ci Pontiac motor w/ holley mpfi (dynoed 544 ft lbs @ wheels w/ TH400)
Tremec T56 6 speed from 2006 Viper (spec clutch, hyd)
wilwood discs up front(need to go bigger now)
Speed tech upper and lower control arms
QA1 coilovers all corners
Airride Airbar 4 link in rear
Centerline 18 inch billet (8 inch front 9.5 rear)wheels (havn't received yet sure to include pics when I do)
maybe with a little urging, I can get out and drive it soon. I'll post the progress along the way.
One more Firebird fan in WI great news. Car sounds nice. Where in WI are you from?
PS GET TO WORK ON THAT CAR!
__________________
[SIGPIC][/SIGPIC]1968 Firebird AKA "Jinx" 455,TKO 600, Mini tubs,4 link and more...
1969 Firebird project "routy"
1997 TA sliver 6 speed with leather
Steve
Last edited by Steve Firebird; 04-06-2009 at 07:57 AM.