This worked out Great last year so let's do it again.
I don't want to miss one PT car this year. So if you have a car that will be on display at SEMA Please give as much info as you can.
Vendor
Booth#
What kind of car.
A Picture finished or not would be GREAT.
Hope to see all of you there.
OK as of 10/23/07 this is what I have
Nemesis Motorsports 50352 67 Mustang Hdesign
Wilwood Disc Brakes 25113 68 Camaro Pad Penny
Goodyear/Dunlop 41409, 41427 Bob???
Nitrous Express 23057 Camaro KD hot Rods
American Autowire 50030 Camaro Vipercuda
Grant Products Internation 22373 Cuda Vipercuda
Atech Motorsports 20879 Hemi Dart theKrook
Snap-On Equipment 41944, 42044 Larry Chop-Shop Customs
Sony Electronics Inc. 11170, 10980 Norms Truck theKrook
MagnaFlow 70007 (Front Parking Lot) II Much (67 Nova) John Parsons
ProCharger 24365 Prodigy Vette
* Gear Vendors Overdrive 22873 72 Torino Steve Strope PureVision
* Electric Life 22991 69 Firebird Prodigy Customs Lisa Serafine
* Twist Machine 21085 Devious built by Jason Huber
* iForged 44909 69 Camaro Mizfit Motors Taylor Day
* HP Performance Products 50144 71 Cuda Time Machines Mike Staveski
* Information from Popular Hot Rodding Dec 2007 Issue
It is Mike from Time Machines. I am launching a new car at SEMA this year. The line is called Modern Muscle. We will be building three types of cars; 69 camaro, 70-71 cuda, and 69-70 Mustang Fastback. There will be two models of each car. One model is a complete chassis car, we are using Art Morrison for the chassis. The other model will be a updated bolt-in suspension style build. We are developing both independent front and rear suspensions for the cuda. The camaro & mustang will utilize the current pro-touring aftermarket kits on the market.
The camaro and the cuda will be at SEMA this year. Both prototypes are full chassis cars. The camaro utilizes all C-5 vette suspension. The front is all Morrison and rear suspension is all 21st Century Street Machines. The camaro will be in American AutoWire's display at SEMA.
The cuda is all AME chassis. It is mustang II front and their rear suspension with 4.56 gears. It has a six speed and a big 540 Hemi by HP Performance. It will be in HP Performance's display at SEMA.
I know you guys will ask for pictures but I am not ready to share pictures just yet but I can tell you that Jason Rushforth helped me with the design of all three cars. I can tell you that Jason is a pleasure to work with, this line has been in my head ever since we built the Motion camaro and has only gotten better with Jason's input. No the camaro will not look cartoonish.. It is all 69 camaro
I will be ready to share some pictures in a few weeks so please be a little patient.
the kd hotrods camaro will be in the nitrous express booth
the 57 chevy still working on the spot ( maybe changing booth spots )
and a 64 nova streetcar in the greg weld booth
Both of my cars are scheduled to be in Hot Rod Alley. The camaro will be in American Auto Wire's display and the cuda in HP Performance's display. I don't always like to put booth #s down this early because they can always change. AAW booth # is 50030 in Hot Rod Alley. HP is right near them in Hot Rod Alley but they are trying to move their booth like many companies do... I am trying to get a bigger booth too so I can fit a car but right now my booth is 21182. It is right across from Twist Machine's. We will be showcasing new parts from the line.
Looks like "Ouroboros" is going to be a iforged feature car. They have already booked their booth cars but the were nice enough to let us in as a feature car since we were last minute and we will be put in a hallway or something. But just excited to be going
Brian Hobaugh SCCA National Tour June 2014
First Hemi 'Cuda Convertible Ever Built
Short clips: Goodguys Pleasanton autocross and pit videos
Cars Going to SEMA 2007
. 
Linear Mode
