help w/ globalwest solid body bushings

[shanekennedy]

planned to installed my new 1/2" lowered body bushings on 68 camaro this past weekend, but parts were not labeled & dimensions were not included w/ instructions. the radiator support busings have smaller bolts & are easily identified, but the other bushings are confusing. there is a thick & thin male bushing & a thick & thin female bushing. any idea which 1 goes where ?

tried calling globalwest all week. they must have taken the week off.

[chicane]

The four larger OD bushings go in the mid and rear frame locations. The interloc bushing goes between the body and the subframe. And the smaller OD bushing goes in from the bottm of the sub frame.

The core support bushings are another operation. They dont just slide into the core support themselves... and the core support thru holes will need to be enlarged to fit correctly.

[shanekennedy]

the OD of the bushing are all the same

the cunfusion is which the thickness

i have the 1/2" lowed kit for subframe connectors



from left to right,
1st bushing has .125" lip
2nd bushing has .405" lip
3rd bushing has overall height of 1.2"
4th bushing has overall height of .8"

please explain which bushing goes where

a diagram from global west would have been incredibly usefull