dbw malfunction - Lateral-g Forums

G's Chop Shop · #1 11-14-2012, 12:02 AM

I just finished installing an LS3 out of a 2012 camaro into a 68 chevy truck. I used a harness supplied by the customer. Harness is the original from the motor. This harness was sent to Fuel Injection specialties to get reworked. Installation went good until I find out that the plug for the pedal was too short to route into the truck. I call FIS to let them know my problem so they sold me an extension to reach the pedal. I hook it up, start it up and nothing......no throttle response.

Am I missing something? Should I try another pedal?

**canrc** · #2 11-14-2012, 08:38 AM

I had a similar problem -- new pedal fixed it for me.

G's Chop Shop · #3 11-14-2012, 08:19 PM

found the problem.....found out 2 of the 6 wires were switched over in the connector. I spliced them and connect them the way they should have been and it was good to go. Called up Fuel Injection Specialties and they are willing to ship me a new one if I sent pictures of the connector where it was wrong.