Torque thrust 18x9 w kore3 c6 z51 brakes?

[MrElectric03]

I hate to be the guy asking this question but...

I have a 68 Firebird. I'll be mini tubbing the rear and planning on AFX spindles and a speedtech front end setup. I'm trying to figure out if 18x9 torque thrust SL wheels will clear the kore3 c6 z51 brakes and 340mm rotors. I found one person who claims that 17x9 TT2s cleared the diameter but hit the front of the caliper. The TTM and TT SL spokes are larger than the TT2 and having a bit extra diameter maybe close and I wouldn't mind having to run a small spacer. Hoping someone may have some first hand experience.

The templates that kore3 put on their site are awesome. Unfortunately I don't have the wheels and TT SLs are made to order. Needless to say I'd be screwed to buy them and then find they don't fit.