Engine advise.. and contest of sorts

[Steve1968LS2]

Hey,

Time to start formulating an engine build for my Fairlane. Here's what I need to do.

Run 11.70 minimum in the 1/4 mile
Cars weight is 3500 lbs.

Need to use a C4 auto transmission and line lock

can change out the differential to one with appropriate gearing

Now the fun part.. the engine.

351W based (can be a stroker, 408?)

Max budget for the engine (carb to pan with disty) is $6000

I imagine that to him my drag number I need over 500hp.

Also, this is a magazine deal so I need to use part for mainstream companies for obvious reasons. Barry Grant, Edelbrock, those sorts of people. The exception is if an offbeat place makes a part that is lightyears better than the other guys for around the same price.

Oh, has to run on CA pump gas so no crazy compression or an idle that completly sucks to cruise around town with.

So, give me your build ideas. If I pick on for this site I will send that person a prize. Nothing extravagant, but something fun.

The sooner I do this chore the sooner I can start working on handling and braking.

[Speedster]

Steve -
NA or Power Adder ?

[Steve1968LS2]

Originally Posted by Speedster

Steve -
NA or Power Adder ?

NA.. especially with a $6k budget.. lol

[Jr]

I would call:
Joe Sherman Racing
2302 W. Second Street
Santa Ana, CA 92703
(714) 542-0515

He will set you up with a nice setup...what do I win? I can swing by the placentia office to pick it up ...
Thanks, David

[Steve1968LS2]

Originally Posted by DJW32

I would call:
Joe Sherman Racing
2302 W. Second Street
Santa Ana, CA 92703
(714) 542-0515

He will set you up with a nice setup...what do I win? I can swing by the placentia office to pick it up ...
Thanks, David

That's like me asking for cake recipie and you refering me to Betty Crocker.. lol

[HAULNSS]

Originally Posted by Steve1968LS2

That's like me asking for cake recipie and you refering me to Betty Crocker.. lol

Nice!



Randy

[Jr]

Originally Posted by Steve1968LS2

That's like me asking for cake recipie and you refering me to Betty Crocker.. lol

And she makes one hell of a cake...If it aint broke...

[1970cuda]

1 seasoned windsor block
1 stroker crank
8 connecting rods
8 pistons
assemble at room temp
add cam
bolt on intake and carb
ect ect ect
add 5 quarts of oil
add fuel and
blend to 6500 rpm

[radrambler]

steven
i picked up summit to see if i could figure out how to do this on $6k
damn tough....

heres my list 3200.00 ford 351w short block from ford racing
a set of heads 1287.95 from trick flow heads..aluminum ..weight reduction helps ....... 530.00 big shot nos system....gonna need that to move the boat
a air gap intake 232.00
a 850 cfm carb 609.00 from quick fuel tech
a msd billet dist. 225.95.....
for a total of $ 6084.90 ..now the kicker
......................-400.00 aprox sell the motor out of the fairlane
and you have the odds and ends money to button it up....thats as far as i go looking a ford stuff....good luck!!


i tried
radrambler

[MrPushrod]

Here's a racing calculator that should help ya.
http://www.tciauto.com/Products/Tech...alculators.asp