My new AFR heads

[jonny51]

I just thought I would pass along my AFR experience.I received my Afr heads along with all my other engine parts on Saturday.Being so overwhelmed with all the parts I didn't get to inspect every part.When I got home and went through all my parts, I realized there was something wrong with the heads.It looked like somebody took a grinder to the front of each head(it is deep so a simple polish wont fix it,it needs to be milled).I called my AFR dealer and he said that they only machine them so far so you won't have a problem mounting your accessories.I decided i would call AFR myself to whats really going on.
I called AFR Monday morning and asked to speak with somebody in customer service.I got a customer service rep named Jason and explained my situation.I told him it was going on a high dollar car that needed to look good and these heads just didn't look very good.He replied with we do not care about how they look we build them for racing and power.I said well I have seen other people run your heads and none looked like these.He replied with "well the big block heads and ls1 heads have a different casting".I said that I have seen SBC AFR heads that look better heck I have never seen this poor of work on any head.I said to him so your telling me I'm screwed?He said this "We know its a problem and we are going to address it in the future but not anytime soon"(so they admit the product isn't up to par).He then went on to say that the only thing he could do for me was too have me go to a dealer and trade them! I replied that no dealer is going to trade me a better looking set and he agreed,go figure.So I said so there is nothing your going to do,he replied with there nothing I can do.I told him I wont be running your product then,his reply was okay.
That's my story just wanted to vent.

[spaztikatik]

Wow man, that sucks so bad, I wouldn't expect that from such a high caliber product as AFR. It's also sad because I don't know of many other head manufacturers that make such good heads as AFR, compared with flow numbers and the massive 76cc combustion chamber size available.

Anywho, if you really don't want to use those heads, I might consider taking them off your hands for the same price you paid if they're the right ones i need and if you wish to purchase new ones. 220 cc intake cnc ported? 76 cc combustion chamber? I don't mind the look of my heads up front, i might even be painting them black to match the engine anywho anyways, give a hollar! i'd more than love to help you out here

-Russ

[XcYZ]

I know a lot of guys will think you're off center for wanting the heads to look as nice as they perform, but I know that your plans for the car are huge with a significant investment. It would be nice if the heads didn't look like someone made them in their garage.

If you don't want to mill them, I highly doubt you'll have a hard time selling them.

[jonny51]

Russ,they are the 210 76cc heads and I have not decided what I am going to do.

Scott,they sure do look like they were done in somebodys garage.I can't imagine AFR using those heads in one fo there add's.Maybe I am being a little picky but they could have not been so rude.Anyway life goes on,no big deal

[jannes_z-28]

I don't know about your consumer laws over there ut here in Sweden a company would not live long giving a customer that kind of reply.

We have a consumer law that require the seller to take any product back within a week if it is not up to the customers expectations. Of course within reason.

Don't you have something that you can press the producer/seller with besides a lawsuit?


Jan

[907rs]

I thought we already discussed this?

Jonny, take a deep breath, eat a few pancakes and get the Brodix's.

Jk man. It's a bummer, but as Scott said, you should have no problem selling them, plus you probably won't have to wait months for what ever brand you decide on replacing them with.

[jonny51]

Got some new heads.

[Jay Hilliard]

OK Johnny. Come clean with the specs and who makes these heads. I am looking into the Brodix heads as well. They look very nice! I dont blame you at all for wanting the heads to have NO cosmetic flaws. I am the same way.

[BC69]

Those look nice! Were you able to send the AFR heads back without issue? Full refund? I hope that part went smooth at least.

Tim

[jonny51]

Jay,the heads are Brodix track one's they are 215cc CNC ported.Standerd on these heads is 68cc chambers but I orderd them as big as I could get them.Right now I have no idea what size chambers they are.

As far as AFR goes no they would not take the heads back.I still have them collecting dust in the garage.