G-Bar suspension with Moser M9 housing - Lateral-g Forums

**scherp69** · #1 02-07-2008, 05:12 PM

Well it took some time and a lot of phone calls, but I've finally decided what rear suspension is going into the 68 Acadian. I was originally going to go with leaf spring/ladder bar set up but was quickly told that was not the way to go. I was then looking an AME rear clip set up, but don't want to cut my entire trunk out. I wanted something easy to go with. After many phone calls to Frank at http://www.prodigycustoms.com/ I have ordered an Alston G-Bar set up with QA1 shocks instead of the Varishocks as I already have QA1's in the front and want to keep them all the same. I also have coming a Moser M9 housing with back brace and Moser 31 spline axles. And I have some money left over to buy new rear wheelhouses. In the front I already have Speed Tech upper and lower control arms with the QA1 coil overs. In between will be a 427 sbc 500+ hp and a TKO 600 with 18" Foose Nitrous II's on each corner.

I highly recommend giving Frank a call. He was very patient with my million phone calls and questions and made a number of calls on my behalf. Thanks again for everything Frank.

Bowtieracing · #2 02-12-2008, 07:37 AM

Hmmm this makes me wonder... Do you have pics of it yet ?

ProdigyCustoms · #3 02-12-2008, 07:49 AM

His rear is the first one, so we have a little time in front of us, Stay tuned

**scherp69** · #4 02-12-2008, 02:14 PM

I will post pics as soon as I have it....unless Frank posts some when he gets it.

BBC69Camaro · #5 03-01-2008, 07:01 AM

Any updates? Thinking of doing something similar myself.

Thanks.

rallye455 · #6 03-01-2008, 09:56 AM

How much did the rear housing and axles cost if you dont mind me asking?